[DEITY] Composants 2008

[cycledelique]

Deity Composants 2008

Blk Mkt Full Deity (ou presque)




Pédaliers Vendetta


Traduction en cours :
-box cut cr-mo arms are much lighter and stiffer
-lightest cr-mo crankset made
-self extracting crankbolts with 7075 dust caps keep crankbolts from backing out or arms from loosening
-full 7075 T6 Spacers to decrease weight and avoid "mushrooming" under heavy side loads (not steel or 6061)
-true hollow heat treated cr-mo spindle
-compatible with both 68 and 73mm BB shells
-short spline boss height to remove 8mm of unnecessary cr-mo material
-plug in driveside 4mm 7075 spacer to space sprocket further in board without affecting crankarm clearance or to clear a bashguard for geared set up (designed for optimal weight savings due to short spline boss height)
-amazing ankle clearance
-one piece forged spline and sprocket boss with nano/micro sprocket boss option (2 sprocket boss mounts....which is also lighter)
-deep euro cups to keep 100% of tool engagement during installation
-counterstep'd 7075 bearing spacers keep your bearing from blowing out and increased the lifespan while also keeping dirt and grime out!
-featuring our new finishing clearcoat processes for increased durability
-Titanium spindles will be available for limited quantities
-83mm BB kits available for downhill use!
-available in black, white, and gray powdercoat


Potence Fantom


Traduction en cours :
31.8/25.4 Fantom Stems-
-machined from 6061 T6 aluminum
-super short stack height for a compact and clean from end
-multiple machine processes to decrease as much material as possible
-internal cross machining
-machined side windows
-machined pockets in the faceplate
-reverse rear bolt system for increased clamping power and allowing us to remove a lot of internal weight
-featuring our new finishing clearcoat processes for increased durability
-available in white, black, and gray powdercoat


Seat Post


Traduction en cours :
-same clamping system as used by Shadow and other companies but with our own 3D forged body for huge weight savings
-3D forged from 2014 T6 aluminum allows us to make one of the lightest seatposts on the market
-oval inner forge for optimal strength in hight stress areas
-splined clamping system with spring loaded guts makes fitting of a seat the easiest in the industry
-single bolt installation system
-guts can be inverted to slam your seat by almost 2 inches!
-available in a 350mm length
-available in a 27.2 diameter
-7075 T6 black anodized shims available in 30.0mm, 30.9mm, and 31.6mm
-available in white and gray graphics!
-$45!


-much lighter than the 2007 model!
-8mm hollow cr-mo rails
-available in 3 graphics with protective coating to increase wear
-Death Grip black model features rubberized top for some of the best pinchability in the market



Cintres

DirtyThirty

Traduction en cours :
DirtyThirty Handlebar-
-custom drawn double butted 7075 T6 aluminum for incredible weight savings
-760mm length (30 inches!)
-butting dimensions designed around the wider bar for correct strength placement in the necessary areas
-25mm rise
-9 degree bend x 5 degree upsweep
-featuring our new finishing clearcoat processes for increased durability
-available in black, white, or gray powdercoat
-31.8mm clamping diameter

2014



Embouts de guidon

LifeSaver

-machined from 7075 T6 aluminum for increased durability and weight savings
-smooth round edges
-machined to be on of the lightest end caps on the market
-2 set screw design for increased reliability
-countersunk/recessed screws so hands to not get cut
-ODI lock on grip conmpatible or just run them with a standard grip


Source : http://www.ridestreet.co.uk/forum/viewtopic.php?t=6021